Skip to content

Product Specifications

Labeled HEPA/UV Module diagram

Included parts

HEPA/UV Module
(1) HEPA/UV Module
HEPA Filter
(1) HEPA Filter
Pre-Filter
(1) Pre-Filter
UV Bulbs
(2) UV Bulbs
M12 AUX Cable
(1) M12 AUX Cable
2.5 mm Hex Screwdriver
(1) 2.5 mm Hex Screwdriver
Power Cable
(1) Power Cable
Carrying Handles and Caps
(4 each) Carrying Handles and Caps

Physical specifications

Specification Details
Box dimensions 102 cm L x 79 cm W x 25 cm H
Module dimensions 87 cm L x 64 cm W x 14 cm H
Module weight ~20 kg (42 lbs)
Operating space 20 cm / 8” (minimum) of side and top clearance

Input and output connections

The HEPA/UV Module has the following power input requirements, which are met by the included power supply.

Warning

Observe the following when handling the module power cable:

  • Always plug the power cable into a grounded outlet.
  • Make sure that the power cable is not obstructed, in case it needs to be disconnected.
  • Do not replace the power supply cable unless at the direction of Opentrons Support. This ensures that the power cable has adequate ratings for the equipment.

Power specifications

Specification Details
Input
  • 100–240 VAC, 50/60 Hz
  • 2.2 A at 115 VAC
  • 1.1 A at 230 VAC
Output 24 VDC, 8.4 A, 201 W max
Mains supply voltage fluctuation 100–240 VAC ±10%
Fuse type T3.15 A, 250 V, 5×20 mm

Power consumption

The power consumption specifications are measured with the UV lights and fan on.

  • Typical power consumption: 75.5 W
  • Peak power consumption: 160 W